Brand:	Wiseco Pistons
Product Line:	Wiseco Chrysler/Dodge
Part Type:	Pistons
Bore (in):	3.307 in.
Bore (mm):	87.500mm
Piston Style:	Dish, with no valve reliefs
Piston Material:	Forged aluminum
Compression Distance (in):	1.400 in.
Piston Head Volume (cc):	+18.00cc
Wrist Pin Style:	Press fit or floating
Pin Diameter (in):	0.866 in.
Piston Ring Thickness:	1.0mm x 1.2mm x 2.8mm
Quantity:	Sold as a set of 4.
Notes:	Gram weight 356g.

Wiseco piston and ring kits provide performance for your sport compact. These Wiseco sport compact piston and ring kits give you stronger pistons and tighter tolerances than any other part in your engine, with less internal and external machining. Wiseco's advanced forging process and extensive heat-treating and finishing processes ensure the performance and reliability that you demand from your engine. Wiseco's sport compact piston and ring kits' crown thickness and ring lands are designed for power adders like turbos and blowers and nitrous oxide. They come complete with high-quality piston rings. Whether you're on or off of the street, you can depend on the maximum strength and minimum variance of Wiseco's aluminum-forged pistons for your sport compact vehicle.

Pistons listed with a compression ratio range: low number is with un-cut deck, high number is block decked to .030 piston to cylinder head clearance. Always check piston to valve clearance - If using VTEC or like mechanisms-check w/ longer duration higher lift lobe. Always run at least .030 piston to head clearance including gasket thickness. If piston appears to be different than expected, please do not hesitate to call Performance Auto Parts at 888-732-1595 to verify compatibility. Footnotes: 1. Most Wiseco pistons have offset pins. Pins must be offset same as o.e. for quietest operation (pin offset will be opposite of direction of engine rotation). 2. Due to a compression height that may protrude above the deck, it is recommended that a .040" thick head gasket is used.