2300 - 5.700 Rod - Flat Top
Part #	Stroke	C/H	Bore	Weight	Compression Ratio*				Ring Set	Purchase Online
					54cc	58cc	62cc	-
10462 $307	3.130	1.090	3.811 3.821 3.841	308 310 314	10.08 10.12 10.20	9.55 9.59 9.66	9.08 9.11 9.19	-	14835	Discounted Prices

Ring Groove: 1.5, 1/16, 3mm
Valve Relief Volume: 2.0 cc
* Pins, Pin Fitting and Spiral Locks Included
* Forged of 2618 High Strength Alloy
* Compression ratio computed with .010 deck and .038 head gasket.

 

 

PRS Series Pistons

Probe PRS Forged Pistons are specifically designed for racing application. Now available for the Chevrolet 350 and Ford 2300, Probe PRS pistons are designed to be the lightest pistons available anywhere. In addition to the ultralight weight Probe PRS forged pistons are designed to radically reduce drag and enhance ring seal to increase power.

* 2618-t6 Forged Aluminum
* Ultra light piston designs
* Ultralight wrist pins
* Full floating wrist pins
* Lateral gas ports (some models)
* .043" top and second rings (some models)
* "Frictionless" skirt designs
* Narrow ring lands

• VMS-75 High Silicon Aluminum
• Tight piston to wall clearance
• Reinforce piston skirts (eliminated collapsed piston skirts)
• Increased valve clearance
• Reduced piston weight
• Offset wrist pins
• Press fit piston pins

Anatomy Of A Better Piston

Anti-Setonation Grooves Reduces detonation by tempering pressure spikes, enhances piston life!
Pressure Equalization Channel Enhance ring eal, producing more power and enhancing fuel economy!
Slotted Drain Back Holes Slotted drain back holes prevent oil from collecting in the oil ring groove.
CNC Diamond Pinhole Finish Produces ultra straight pinholes and outstanding microfinish for extended life and durability.
Slotted Pin Oiling Slotted pin oiling enhances wrist pin and pin holes oiling for durability and long life.
CNC Diamond Skirt Finishing Retains oil on the piston skirt providing superior anti scuffing capability! Also reduces piston noise!
Ultra-Tight Running Clearance Increases piston and piston ring life and reduces blowby!
Precision Forged of Aircraft Alloy Aluminum Our forgings are approximately 75% stronger than hypoeutectic or hypereutectic castings!
Fully CNC Machined Domes and valve reliefs are fully CNC machined for consistency and precise clearance to valves and combustion chambers.