Hi Performance Automotive
Gaskets

Austin, Conventry Climax, Ferrari, Fiat

Austin Head Gasket
Part #	Make / Model	Engine	Bore	Material	Purchase Online
C4146 $89.96	Austin Mini	1300cc	73MM	MLS .030	Discounted Prices
C4145 $80.13	Healy Sprit	1000cc	67.5MM	Copper .043	Discounted Prices

Coventry Climax Head Gasket
Part #	Make / Model	Engine	Bore	Material	Purchase Online
C4301 $82.06	FWA	FWA SOHC 1.1L	74MM	CFM-20 .59	Discounted Prices
C4139 $82.06	FWB, FWE	FWB SOHC 1.2L &1.5L FWE SOHC 1.2L & 1.5L	78MM	CFM-20 .043	Discounted Prices
C4267 $90.01	FPF	FPF DOHC 2.0L	82MM	CFM-20 .59	Discounted Prices
C4229 $82.06	FWA,FWB, & FWE	FWA SOHC 2.5L FWB SOHC 2.0L FWE SOHC 2.0L	80MM	CFM-20 .043	Discounted Prices

Ferrari Head Gasket
Part #	Make / Model	Engine	Bore	Material	Purchase Online
C4430 $141.70	308	308 V8 2V	81MM	MLS .045	Discounted Prices
C4395 $141.70	308	308 V8 2V	89MM	MLS .045	Discounted Prices
C4428 $141.70	308 / 328	308 / 328 V8 4V	83MM	MLS .045	Discounted Prices
C4429 $141.70	308 / 328	308 / 328 V8 4V	89MM	MLS .045	Discounted Prices

Fiat / Lancia Head Gasket
Part #	Make / Model	Engine	Bore	Material	Purchase Online
C4131 $82.06	D50	4 Cylinder	79MM	CFM .059	Discounted Prices
C4307 $82.06	D50 Long Block	4 Cylinder Long Block	79MM	CFM .059	Discounted Prices
C4124 $89.96	Lancia Delta	4 Cylinder	85MM	MLS .040	Discounted Prices

Material Acronyms: AFM - Aluminum Foam Coated, AM - Armor Clad, CFM-20 - Perforated steel core with elastomer coating, KF - Aramid Fiber, RC - Rubber Coated, S - Spring Steel

• Installing a COMETIC MLS (Multi Layer Steel) Head Gasket - The first thing you must do before installing the gasket, check all associated hardware thoroughly for nicks, scratches, or damaged threads as well as checking all threaded holes. If the hardware is inadequate or damaged, gasket failure may be eminent. Also change all the bolts and tap all threaded holes with the appropriate thread chase or cleaning tap. All hardware and mating surfaces should be free from any old sealers, rust, or carbon.
  Check your dowel pins as they register the gasket and head into proper location. Replace worn or damaged dowels. The gasket mating surfaces must be smooth 50RA or finer. Additional sealer is not required with Cometic MLS Head Gaskets. The outer layers of the gasket are coated with a .001" thick coating of viton (a high temperature flouroelastomer).
  Check brass rivet location to ensure the brass river does not interfere with the sealing surface on both the block and head. If the brass rivet needs to be removed a pair of side cutters will give the best results. Remove only the brass rivet.
  Once the gasket is in position double check all passages and overall fitment paying special attention to the bore and chamfer. The gasket should not fall in the bore or lay on the chamfer area. A gasket lying on the chamfer or in the bore will most likely cause a hot spot and lead to pre-ignition, possibly causing severe engine damage or gasket failure.

• Head Gasket Torque Procedure - If you are using studs or head bolts, torque hardware to the manufacturers specification. Fasteners works like a springs and must have proper Torque or Stretch applied to carry the correct amount of clamp force. Also use the proper lube or thread sealer for the job. All fasteners must be final torqued before thread sealant cures to achieve proper torque.
  Torque the fasteners in the correct sequence. It is critical to follow manufacturers torque sequence to apply clamp force evenly. A smooth continuous motion is important for every torque sequence. Re-torque is not necessary unless using hardware that has not been heat cycled.

Warranty Disclaimer*
Due to the nature of performance applications, the parts in this catalog are sold without any express warranty or any implied warranty of merchantability or fitness for a particular purpose. Cometic Gasket Inc. shall not, under any circumstances, be liable for any special, incidental or consequential damages, including, person, party or property, but not limited to, damage, or loss of property or equipment, loss of profits or revenue, cost of purchased or replacement goods, or claims of customers of the purchase, which may arise and/or result from sale, installation or use of these parts. Installations of these parts could adversely affect the motor manufacturers warranty coverage.